Pinning down social vulnerability in Sindh Province,Pakistan: from narratives to numbers,and back again

This paper reflects critically on the results of a vulnerability assessment process at the household and community scale using a quantitative vulnerabilities and capacities index. It validates a methodology for a social vulnerability assessment at the local scale in 62 villages across four agro‐ecological/livelihood zones in Sindh Province, Pakistan. The study finds that the move from vulnerability narratives to numbers improves the comparability and communicational strength of the concept. The depth and nuance of vulnerability, however, can be realised only by a return to narrative. Caution is needed, therefore: the index can be used in conjunction with qualitative assessments, but not instead of them. More substantively, the results show that vulnerability is more a function of historico‐political economic factors and cultural ethos than any biophysical changes wrought by climate. The emerging gendered vulnerability picture revealed extremes of poverty and a lack of capacity to cope with contemporary environmental and social stresses.     

Integrating livelihoods and conservation in protected areas: understanding the role and stakeholder views on prospects for non-timber forest products,a Bangladesh case study

Protected areas (PAs) represent a key global strategy in biodiversity conservation. In tropical developing countries, the management of PAs is a great challenge as many contain resources on which local communities rely. Collection and trading of non-timber forest products (NTFPs) is a well-established forest-based livelihood strategy, which has been promoted as a potential means for enhanced conservation and improved rural livelihoods in recent years, even though the sustainability or ecological implications have rarely been tested. We conducted an exploratory survey to understand the role and stakeholder views on conservation prospects and perceived ecological feasibility of NTFPs and harvesting schemes in a northeastern PA of Bangladesh, namely the Satchari National Park. Households (n?=?101) were interviewed from three different forest dependency categories, adopting a stratified random sampling approach and using a semi-structured questionnaire. The study identified 13 locally important NTFPs, with five being critically important to supporting local livelihoods. Our study suggests that collection, processing and trading in NTFPs constitutes the primary occupation for about 18% of local inhabitants and account for an estimated 19% of their cash annual income. The household consensus on issues relating to NTFPs and their prospective role in conservation was surprisingly high, with 48% of respondents believing that promotion of NTFPs in the PA could have positive conservation value. The majority (71%) of households also had some understanding of the ecological implications of NTFP harvesting, sustainability (53%) and possible management and monitoring regimes (100%). With little known about their real application in the field, our study suggests further investigations are required to understand the ecological compatibility of traditional NTFP harvesting patterns and management.     

Removal of heavy metal ions from aqueous system by ion-exchange and biosorption methods

Environmental Chemistry Letters - Pollution due to heavy metals is currently a serious problems affecting water bodies. The removal of heavy metals is of great concern due to their toxicity at...     

Application of canonical correspondence analysis to determine the ecological contribution of phytoplankton to PCBs bioaccumulation in Qinhuai River,Nanjing, China

The distribution and interactions of phytoplankton and 14 polychlorinated biphenyls (PCBs) were investigated using canonical correspondence analysis in autumn in the Qinhuai River, Nanjing, China. Concentrations of PCBs in water and algal samples ranged from 33.78 to 144.84 ng/L and from 0.21 to 19.66 ng/L (0.06 to 3.04 ng/mg biomass), respectively. The predominant residual species of PCBs in water samples were tri- through hexachlorobiphenyls, and the predominant residuals in algae were tri-, tetra-, and heptachlorobiphenyls. The degree of eutrophication affected phytoplankton composition and PCB bioaccumulation, and led to sample site- and algal species specificity of PCB residues in the study area. Chlorophyta, Bacillariophyta, and Euglenophyta had strong capacities to take up PCBs, whereas Cyanophyta was less involved in the transfer of these compounds. Bioaccumulation of PCBs by algae may be affected by water quality, chlorination, phytoplankton composition, and the structure of the PCBs and the algal cell walls.     

Performance evaluation of a continuous flow photocatalytic reactor for wastewater treatment

A novel photocatalytic reactor for wastewater treatment was designed and constructed. The main part of the reactor was an aluminum tube in which 12 stainless steel circular baffles and four quartz tube were placed inside of the reactor like shell and tube heat exchangers. Four UV–C lamps were housed within the space of the quartz tubes. Surface of the baffles was coated with TiO₂. A simple method was employed for TiO₂ immobilization, while the characterization of the supported photocatalyst was based on the results obtained through performing some common analytical methods such as X-ray diffraction (XRD), scanning electron microscope (SEM), and BET. Phenol was selected as a model pollutant. A solution of a known initial concentration (20, 60, and 100 ppmv) was introduced to the reactor. The reactor also has a recycle flow to make turbulent flow inside of the reactor. The selected recycle flow rate was 7?×?10^?5 m³.s^?1, while the flow rate of feed was 2.53?×?10^?7, 7.56?×?10^?7, and 1.26?×?10^?6 m³.s^?1, respectively. To evaluate performance of the reactor, response surface methodology was employed. A four-factor three-level Box–Behnken design was developed to evaluate the reactor performance for degradation of phenol. Effects of phenol inlet concentration (20–100 ppmv), pH (3–9), liquid flow rate (2.53?×?10^?7?1.26?×?10^?6 m³.s^?1), and TiO₂ loading (8.8–17.6 g.m^?2) were analyzed with this method. The adjusted R ² value (0.9936) was in close agreement with that of corresponding R ² value (0.9961). The maximum predicted degradation of phenol was 75.50 % at the optimum processing conditions (initial phenol concentration of 20 ppmv, pH?～?6.41, and flow rate of 2.53?×?10^?7 m³.s^?1 and catalyst loading of 17.6 g.m^?2). Experimental degradation of phenol determined at the optimum conditions was 73.7 %. XRD patterns and SEM images at the optimum conditions revealed that crystal size is approximately 25 nm and TiO₂ nanoparticles with visible agglomerates distribute densely and uniformly over the surface of stainless steel substrate. BET specific surface area of immobilized TiO₂ was 47.2 and 45.8 m² g^?1 before and after the experiments, respectively. Reduction in TOC content, after steady state condition, showed that maximum phenol decomposition occurred at neutral condition (pH?～?6). Figure

The schematic view of the experimental set-up     

Forest protected area governance in Bangladesh:a focus on the legal and policy framework

In the context of renewed interest in collaboration in natural resource management,the collaborative governance approach has lately been introduced to the forest Protected Areas(PAs)in Bangladesh.The adoption of this co-management approach is seen as an attempt to influence the governance process towards a transformation from the conventional custodian system to a more participatory management regime.Recognition of rights and responsibilities,effective participation,and equitable distribution of benefits amongst the key stakeholders working under a facilitative policy and legal framework are believed to address the broader goals of sustainable development Notwithstanding the resurgence of interest in governance of forest PAs through the co-management approach,academic research on the subject remains limited.This article attempts to review selected key information and milestones on the forest PAs governance with special reference to the major policies and legal documents.With a brief introductory section,this article focuses on the genesis and selected major features of the Forest PAs in the country.The discussion then dwells on the policy and legal framework and provides a critique on its relevance for promoting community participation.The existing institutional arrangements for community engagement in protected area governance are also analyzed in light of the national and international commitment and policy obligations on the part of the country.The salient observations and key findings of the study include the following:(1)despite its limitations,comanagement as concept and practice has gradually taken roots in Bangladesh;(2)the degree and level of active community participation remain low and limited,and there is also clear weakness in conscientizing and orientating the local community on the key legal and policy issues related to PA governance in the country;and(3)policy makers,practitioners,and other local stakeholders related to PA governance need to be oriented on international commitment and national de     

Multivariate analysis of trace metal levels in tannery effluents in relation to soil and water: a case study from Peshawar, Pakistan

Tannery effluents and relevant ground water and soil samples collected from various tanning industries of Peshawar were analyzed for Na, Ca, K, Mg, Fe, Mn, Cr, Co, Cd, Ni, Pb and Zn by the AAS method. The metal concentration data for the three media are reported in terms of basic statistical parameters, metal-to-metal correlations and linear regression analyses. Metal distributions in the three media were quite divergent and showed non-normal distributions with high standard deviation and skewness parameters. Sodium exhibited the highest mean levels of 1,277mg/L, 881mg/L and 12,912mg/kg in the effluent, ground water and soil samples, respectively. Among other metals, Cr concentrations were 410mg/L, 0.145mg/L, 100mg/kg and Ca, 278mg/L, 64.8mg/L, and 2,285mg/kg in the effluent, ground water and soil samples, respectively. Some significant correlations were observed between effluent and soils in terms of Na, Cr, Ni, Co and Pb. The ground water-soil interrelationship suggested that Na levels in the soil and ground water were significantly correlated with each other (r=0.486, P<0.01). Similarly, Cr in the soil is strongly correlated with Ca in ground water (r=0.486, P<0.01). These results were duly supported by the linear regression analysis of data. The source identification studies conducted using Principal Component Analysis (PCA) and Cluster Analysis (CA) evidenced that ground water and soil were being contaminated by the toxic metals emanating from the tannery effluents.     

Impact of innovation in renewable energy generation,transmission, or distribution-related technologies on carbon dioxide emission in the USA

Environmental Science and Pollution Research - Innovation in renewable energy generation, transmission, or distribution-related technologies (IREGT) is an effective way to deal with environmental...